Manac 10248C000L – Flatbed, 48'-0" x 102"

Manac 10248C000L flatbed semi-trailer, 48'-0" length and 102" width.

Key Specs

• Length: 48'-0"
• Width: 102"
• Width between side rails: 97"
• Height (floor): APPROXIMATELY 59 1/2" HIGH AT FRONT AND 54" AT REAR
• Compliance: CA LEGAL

Coupling

• Coupler plate: 1/4", 80000 PSI STEEL, PLUG WELDED STRUCTURE
• King pin location: 30" FROM FRONT
• Coupler height: 48"

Structure

• Frame: 44" C/C FRAME WITH "CAMBER"
• Flanges: 3/8" x 5", HIGH TENSILE
• Web: 1/4" PLATE IN KING PIN AREA AND THE REMAINING IN 3/16", 80000 PSI STEEL. 27" HIGH AT THE PEAK WITH HOLES, PARACHUTE SHAPED, TO LIGHTEN TRAILER
• Gooseneck: 11 1/4" HIGH, WITH INTEGRATED NOSE RAMP AND 48" STRAIGHT BEHIND KING PIN
• Crossmembers: I BEAMS, 4" @ 3.2 LBS/FT, 80000 PSI STEEL, GALVANIZED, 16" C/C
• Floor: STRUCTURAL ALUMINUM EXTRUSIONS, FLAT TYPE, INVERTED "T", 1 1/8" HIGH WITH 4 APITONG OR EQUIVALENT PLANKS
• Floor fastening: SCREWS
• Side rails: 4 3/8" x 5 11/16" HIGH, EXTRUDED ALUMINUM ("LEGEND" MODEL)
• Side boxes: 3 5/8" x 1 5/8" INSIDE, 4" HIGH, EXTRUDED ALUMINUM. CMVSS-905 WLL, 5500 LBS WLL APPROVED
• Rub rails: ALUMINUM EXTRUSIONS 3/8" x 2 3/4", SINGLE RUB RAIL SPACERS 1" x 1 3/4" AS ANCHOR
• Corners: BEVELLED
• X braces: BETWEEN MAIN BEAMS, FULL LENGTH

Ends

• Front rail: BOLTED ALUMINUM EXTRUSION, 7" HIGH, OVERLAPPED FLOOR TO ALLOW PLANK TO WALK UNDERNEATH
• Bumper: CMVSS 223-RIG APPROVED (IN ACCORDANCE WITH CANADA & USA REGULATION). GALVANIZED (G164) STEEL, BOLTED UPRIGHTS TO FRAMES, 4" x 4" CROSS BAR FORMED TUBING AT A MAXIMUM HEIGHT OF 22" FROM UNDER TUBING TO GROUND
• Rear bumper: 2 RUBBER DOCK, AT THE END OF REAR RAIL
• Rear rail: FORMED STEEL, GALVANIZED

Electrical

• Front connector: 7 WAY (SAE J560)
• Electrical system: SHOCK PROOF LIGHTS, POLYCARBONATE LENSES, IN COMPLIANCE W/ CMVSS 108
• Main system: GROTE ULTRA BLUE LED, SEALED BEAMS, TAIL LIGHTS, MARKERS LIGHTS "DOT", IDENTIFICATION LIGHTS (2 1/2" DIA.), LICENSE LIGHT
• Flashers: SEALED BEAMS LED, ONE LAMP INCLUDING SIDE MARKER AND FLASHER, EACH SIDE AT MIDDLE POINT, AMBER

Landing Gear

• Landing gear: AXN, (LG50DUN)
• Sand shoes: 10" x 10"
• Crank: ROAD SIDE

Bogie

• Bogie: FIXED, FOR TANDEM 122" SPREAD
• BASIC MECHANICAL